Profess Diploma in Engineering
The following details the simulated workshop resources which complement current industry practices and meet the Training Package requirements.
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 16 students
· Computer desks with 16 workstations (8 connected to the virtual Desktop Interface, and 8 connected to the general internet)
· Computers are networked with Internet access on two separate systems to enable both hardware related units and software only units to be taught.
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 15 students
· Workbenches with 15 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, function generator, desktop computer and monitor.
· Computers are networked with Internet access, and run the latest software for producing control programs for programmable logic controllers.
· Basic leads, additional test equipment and components stored in classroom cupboards.
· 15 individual physical control project resources. Eg controllable water tanks, pick and place equipment, conveyor belt
· Data projector and AV system.
· Elmo projector (document camera and projection system)
· Overhead projector
· Workstations and seating for 30 students
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, function generator, desktop computer and monitor.
· Computers are networked with Internet access.
· A separate storeroom for computer hardware equipment
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 15 students
Computer desks with 15 workstations (all connected to the virtual Desktop Interface and the general internet
· Simulated metal workshop
· Large whiteboard and screen.
· Overhead projector
· Metalwork workbenches and seating for 24 students
· Vices and metal blocks
· Heavy machinery including drills, guillotines, notchers, hole punchers, and metal benders.
· Stores all equipment and components to service classes delivered in workshop room KG.1 (and other Electronics classes operating out of Building K). These include but are not limited to:
§ Tool boards
§ Soldering irons and accessories
§ Wires and leads
§ Electronic components (consumables)
§ Test equipment
§ Accessories for workshop machinery
§ Sheet aluminium
§ Personal protective Equipment (PPE)
· Whiteboard and screen.
· Overhead projector
· Chairs and desks for up to 12 students
· Workbenches with 8 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, and function generator.
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 10 students
· Workbenches with 15 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply and function generator.
· Basic leads, additional test equipment and components stored in classroom cupboards.
· Low voltage 3 phase sources, plus 415 3 phase outlets.
· Access to storeroom and motor room on level 1 where the motors are kept. They are too heavy to move to other levels.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 24 students
· Workbenches with 15 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply and function generator.
· Basic leads, additional test equipment and components stored in classroom cupboards.
· Low voltage 3 phase sources, plus 415 3 phase outlets.
· Movable motor controllers with motors for practical work.
(No 33
Thirdfloor Left- Danon thiri Street, Kyauk-myaung, Tamwe Township, Yangon,
Myanmar)
· Large whiteboard and screen.
· Overhead projector
· Chairs and desks for up to 16 students
· Workbenches with 8 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, function generator, desktop computer and monitor.
· Computers are networked with Internet access.
· Computers run Multisim circuit simulation software.
· Call-out rooms allow for assessing students individually.
· Basic leads, additional test equipment, components and LJ accessories are stored in the classroom and surrounding office areas.
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 24 students
· Large whiteboard and screen.
· Data projector and AV system.
· Overhead projector
· Chairs and desks for up to 12 students
· Workbenches with 5 workstations
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, function generator, desktop computer and monitor.
· Computers are networked with Internet access.
· Basic leads, additional test equipment and components stored in classroom cupboards
· Each workstation consists of a two-channel oscilloscope, dual-rail power supply, function generator, desktop computer and monitor.
· Computers are networked with Internet access.
· Demonstration workbench
· Stores all equipment, components, and additional test equipment to service classes delivered in the Building-L laboratories. These include but are not limited to:
§ Tool boards
§ Soldering irons and accessories
§ Wires and leads
§ Electronic components (consumables)
§ Breadboards for prototyping circuits
§ Training and simulation panels and equipment
§ Test equipment
§ Consumer electronic equipment
(4) Civil & Mechanical Engineering
Training Workshop--- Future
expansion
No 704 Myitta Street, 12 Ward, South
Okkalapa Township, Yangon, Myanmar
·
Engine
Assembly
·
Mechanical
Workshop tools
·
Brick
laying, Pipe Fitting & Carpentry Workshop Workbenches
·
Table
& Chairs
·
(5) Online Training Website--
Existing facility